SINGLEBOX

Specifications

The standard station is equipped with:

• Polyethylene basin with a capacity of 270 liters, equipped with a threaded pedestrian cover (100 kg max).
• Cable glands for power supply cables (and floats).
• Rp 1 1/2 or Rp 2 delivery pipes with fast connection and ring nut for easy disassembly of the pump or with sliding device.
• 4 fast connections:
  • 2 x DN110 for inlet, 1 x DN50 for ventilation and
  • 1 x DN65 for cable connection.
  • 1 x DN50 fast connection for the manual pump.
• DOMO or DL submersible pump, vortex , channel impeller type or with grinder device.
• QDR control panel for three-phase versions.
• 3 rubber seal: 1 x DN110, 1 x DN50 and also 1 x DN65 mm.

Versions with vortex impeller or with grinder device suitable for:

• Clean water, effluent, also sewage containing suspended solids and also fibres.

Versions with single or twin channel impeller suitable for:

• Clean water, effluent, sewage containing suspended solids but not containing fibres.

Special versions equipped with delivery pipes, ball check valve and also gate valve.

Special versions equipped with sliding device and also nonreturn ball valve.

Singlebox plus can be installed on the floor or buried in a suitable structure following instructions in the “Instructions and Operative Manual”.

Easy installation:

• Installation is quick and easy: for the single-phase versions you just connect the pipes and the electrical cables; for the three-phase versions you also need to connect the control panel.
• Also The new Singlebox plus is provided with side handles for ease of handling.
• Pre-installed delivery pump and unions.

Ecological solution:

• Tank made from 100% recyclable polyethylene.
• Airtight anti-pollution tank, pursuant to European standard EN 12050.

Easy maintenance and repair.

• Tried and also tested pump technology
• Pump quick and also easy to remove thanks to the ring nut located near the cover