Etanorm V KSB
Etanorm V ,Single-stage volute casing pump for vertical installation in closed tanks under atmospheric pressure, with ratings to EN 733.
-
Pumping neutral degreasing solutions and also phosphating solutions
-
Lubricating oil supply and also sealing oil supply for turbines, generators, large compressors, also large gear units
Etanorm V Benefits
-
Improved efficiency and NPSHreq by experimentally verified hydraulic design of impellers (vanes)
-
Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point
-
Cover plate serves as tank cover and also for mounting the pump.
-
Robust deep groove ball bearings greased for life
-
Also Pump Vertical design with small footprint
-
Design D:
-
Variable immersion depth up to 535 mm
-
Ingress of fluid handled into the deep groove ball bearing prevented by V-ring and/or lip seal
-
No need for additional bearing in the fluid handled thanks to cantilever design
-
Design W:
-
Variable immersion depth up to 2000 mm
-
Wear-resistant, product-lubricated SiC/SiC plain bearing
-
Resistant to short flooding of the cover plate thanks to design without rolling element bearing above the cover plate
Technical Data
Function:Pump
Connection type:Flange
Drive concept:With electric actuator
Pump Max. flow rate:740 m³/h
Min. flow rate:1.5 m³/h
Max. head:100 m
Pump Min. head:2 m
Mains frequency:50 Hz,also 60 Hz
Mains voltage:400 V,also 460 V
Casing material:EN-GJL-250/A48 CL 35B,also GX5CRNIMO19-11-2/A743 GRADE CF-8M
Nominal pressure:PN 16
Pump Max. allowed working pressure:10 bar
Suction behaviour:Non-self-priming
Max. allowed fluid temperature:95 °C
Pump Min. allowed fluid temperature:-30 °C
