This pump is of horizontal centrifugal type with a screw chamber and one floor. The pump housing has an axial cut that allows the rotating components to be easily replaced, and there are replaceable wear rings on the housing.

The pump thrust and suction flanges are connected to the lower half of the chamber, both flanges being in a line parallel to the center (linear pump).
The impeller of the pump is radial, closed and has two fluid inlets. In this type of impeller, there will be no axial force, the impeller is statically and dynamically balanced according to ISO1940 .

The pump shaft is completely sealed in terms of fluid leakage and the shaft is covered with a protective bush at the seals. The pump bearings on each side are a number of deep groove ball bearings that are coated and do not require re-lubrication during the life of the bearing.

Applications of dual suction pump

Pumping stations
Z·hkshy- Nyrvgahha- water supply systems, industrial
systems, sewage and petrochemical industry
applications for fire-fighting
purposes Marine
general purpose refineries

General specifications of double suction pump

Output diameter : 80 to  350 mm Flow
capacity : 90 to 3600 cubic meters per hour (up to 1000 liters per second)
Height : up to 200 meters
Working temperature : up to 105 ° C
Test pressure : up to  25 bar