No dosing system, no cooling circuit conditioning required.
Diamond coating provides very low friction, thus reduced power consumption.
Deformation-optimized for high sliding velocities and medium pressures.
Economical due to standardized components.
High flexibility due to adaptation of the connection parts to the pump seal chamber.
Optimum heat dissipation due to integrated pumping device and optimized seat / seal face design.
Operating range
Shaft diameter:
d1* = 120 … 250 mm (4.72″ … 9.84″)
Seal Pressure: p1 = 70 bar (1,015 PSI)
Seal Temperature: t = 300 °C (572 °F)
Sliding velocity: vg = 70 m/s (330 ft/s)
Axial movement: ±3 mm* Other sizes on request
DF-SA DiamondFace Materials
Seal face: Composite carbon
Seat: SiC DiamondFace coated
Secondary seals: EPDM (E), FFKM (K)
Springs: CrNiMo steel (G)
Metal parts: CrNiMo steel (G)
