- Info@worldpump.net
- Location
Menu
Electric sludge pumps are produced by vertical, horizontal and horizontal installation based on Din24255 standard and are fully tested and approved by Din1944 standard in the most equipped laboratory of the company. Electric pumps have open, semi-open and closed impellers and are equipped with various sensors of heat, water, humidity, oil, and burnings based on their rated power. For sealing electric pumps, two German Borgmann mechanical seals are used, one in the motor part and the other in the pump part.
| Transfer of all types of raw wastewater | ||
| Industrial effluent sludge mixed with water | ||
| Activated sludge sieved sewage | ||
| Industrial wastewater | ||
| Special wastewater with long fibers | ||
| Fluids containing air and gas | ||
Advantages of KRTF 170 / 42-50 electric sludge pump (exit from above) |
||
| 01 | Ability to install quickly | |
| 02 | Requires little space | |
| 03 | Requires simple and low cost station | |
| 04 | Possibility of pumping suspended particles with fluid | |
| 05 | Possibility of fixed installation (S) and mobile installation (P) | |
Features of KRTF 170 / 42-50 electric sludge pump (exit from above) |
||
| 01 | Two mechanical seals | |
| 02 | Thermal insulation class F | |
| 03 | Degree of protection IP68 | |
| Drift diameter | 2 inches |
| Discharge capacity | Up to 30 cubic meters per hour |
| Height | 20 meters |
| Fluid temperature | Up to 35 degrees Celsius |
| Hydrostatic pressure test | 6 times |
|
Material |
|
| Axis | Stainless steel 1.4021 |
| the butterfly | Cast iron GG-25 |
| Pump chamber | Cast iron GG-25 |
|
Mechanical seal |
|
| Part of the pump | Silicon Carbide / Silicon Carbide |
| * Material can be changed according to demand | |
