Pumps are devices that meet the needs of their users in many areas of daily life today. These devices are marketed in different models, some of which have their own uses. One type of water pump is a centrifugal pump. Pumpiran is known as one of the manufacturers of this category of water pumps. These pumps are designed horizontally and have one floor. These pumps are designed with a screw chamber that is used in agricultural, industrial and residential sectors. One of the advantages of this pump is the ability to change the material of the pump parts, which is applied by the company upon request. One of the types of centrifugal pumps that are produced by Pumpiran is the centrifugal pump 32-125, which we will examine further.

Technical specifications of centrifugal pump 32-125
The first important point in the technical specifications of the centrifugal pump and of course the catalog of the centrifugal pump is the engine speed of this pump. Centrifugal pumps can generally have a speed of 1450 or 2900 depending on the motor with which they are coupled, which characterizes other information of the pump. Hence the specifications of each are examined separately.

Engine speed 1450 rpm
The discharge of this pump is a maximum of 10 cubic meters per hour, which can cover different heights depending on the diameter of the impeller. In this case, four impeller diameters are defined for the pump, which include values ​​between 120 and 139 mm and can cover a height of 2 to 4.5 meters. The diameter of the suction port of this pump is 1.9 inches and the diameter of its outlet is 1.2 inches. Due to the different heights mentioned, the nominal power of the pump is also different in each of the heights. For the necessary discharge at the mentioned heights, the pump needs 0.24 to 0.34 hp. The power cord and cable used in this centrifugal pump should be selected based on the pump centrifugal pump catalog.

Engine speed 2900 rpm
At 2900 rpm, the pump output increases to 16 cubic meters per hour. The diameters defined for the impellers in this case are similar to the previous case, but provide more height than the previous model. The height at which the pump can be installed is 12.5 to 21 meters. The diameter of the pump suction pipe is 1.9 inches and the diameter of the outlet pipe is 1.2 inches. The power required by the pump for use is considered to be between 1.5 and 3 hp.
The sealing of this pump varies according to the temperature of the fluid and two types of graphite and mechanical sealing are used to protect the pump. If the fluid temperature is between -50 to 110 ° C, graphite tape sealing is used. If the temperature is between -50 and 140 ° C, mechanical sealing should be used. The centrifugal pump is mostly used for clean fluids.

Centrifugal pump foundation 32-125
In setting up a centrifugal pump, it is necessary to pay much attention to the foundation of the pump. The chassis of the device is made of cast iron or by welding steel profiles. The use of each of these methods is affected by the size of the pump and the type of drive (motor). Cast iron and steel chassis have the necessary strength and are vibration-free, which eliminates the need to install the chassis on the foundation, and three support points are enough for them. If you want to install the pump on a concrete foundation, make sure that the foundation is firm and dry before placing the pump on it. In some cases it is possible to place the set mounted on the chassis by the river or well without the need for a foundation.

Centrifugal pump price 32-125
The price of the centrifugal pump 125-32 can be seen in the Pumpiran price list section or the Pumpiran centrifugal pump price list section on the website of Gomareh Abi Pumpiran dealership. In addition, you can get the necessary information about the price and special discounts of Pumpiran pumps through a free consultation with specialists by calling the consultants of this company. The prices offered are only for the purchase of a centrifugal pump. Since this pump can be coupled with different motors, different prices are considered for the motors.